Clear Ipv6 Prefix-List - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

clear ipv6 prefix-list

clear ipv6 prefix-list [ listName [ network/length] ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Clears all hit counts in all IPv6 prefix lists, the specified prefix list, or the specified
Description
entry from the specified prefix list. There is no no version.
Options
Privileged Exec, User Exec
Mode
418
clear ipv6 prefix-list
listName Name of the IPv6 prefix list; string of up to 32 characters
network Base address of the network route to be filtered; for example,
::ffff:a:b:c:d
length Length of the network prefix; number of bits masking base address to
produce address to be matched