Clear Ip Rip Dynamic-Interfaces - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 4: C Commands

clear ip rip dynamic-interfaces

clear ip rip dynamic-interfaces
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Clears all existing dynamic, unnumbered interfaces that were created since issuing
Description
the ip rip copy-to-dynamic command. There is no no version.
Privileged Exec, User Exec
Mode
403
clear ip rip dynamic-interfaces