Clear Ip Pim Remote-Neighbor Count - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

clear ip pim remote-neighbor count

clear ip pim remote-neighbor [ ipAddress ] count
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Clears the counters for remote neighbor statistics on all interfaces or the specified
Description
interface. There is no no version.
NOTE: This command is typically used when you configure PIM remote neighbors
to run multicast services over BGP/MPLS VPNs. That functionality is no longer
supported.
Options
Privileged Exec, User Exec
Mode
400
clear ip pim remote-neighbor count
ipAddress IP address of the interface