Clear Ip Tunnel-Routes - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

clear ip tunnel-routes

clear ip tunnel-routes [ vrf vrfName ] { * | ipAddress ipMask }
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Clears and then refreshes a specified route or all dynamic routes from the tunnel
Description
routing table of the virtual router or a specified VRF. There is no no version.
Options
Privileged Exec
Mode
vrfName Name of the VRF context from which routes are to be cleared
* Clears all dynamic routes
ipAddress IP address prefix for routes that are cleared; in 32-bit dotted-decimal
format
ipMask—Mask of the IP address prefix for routes that are cleared; in 32-bit
dotted-decimal or /N format
Chapter 4: C Commands
407
clear ip tunnel-routes