Clear Ip Routes - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

clear ip routes

clear ip routes [ vrf vrfName ] { * | ipAddress ipMask }
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Clears a specified route or all dynamic routes from the routing table of a specified
Description
VRF or all VRFs. There is no no version.
Options
Privileged Exec
Mode
vrfName Name of the VRF context from which routes are to be cleared
* Clears all dynamic routes
ipAddress IP address prefix for routes that are cleared; in 32-bit dotted-decimal
format
ipMask—Mask of the IP address prefix for routes that are cleared; in 32-bit
dotted-decimal format
Chapter 4: C Commands
405
clear ip routes