Client-Name - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 4: C Commands

client-name

client-name clientname
Syntax
no client-name
Command introduced before JUNOSe Release 7.1.0.
Release Information
From Domain Map Tunnel Configuration or Tunnel Group Tunnel Configuration
Description
mode, sets a hostname for a tunnel that the LAC uses when communicating with the
LNS about the tunnel. The no version removes the hostname from the tunnel.
NOTE: In Domain Map Tunnel Configuration mode, this command is replacing the
hostname command. The hostname command may be removed completely from
Domain Map Tunnel Configuration mode in a future release.
clientname String of up to 64 characters (no spaces)
Options
Domain Map Tunnel Configuration, Tunnel Group Tunnel Configuration
Mode
433
client-name