JUNOSe 11.1.x Command Reference Guide A to M
multicast group port limit
multicast group port interfaceSpecifier limit groupLimit
Syntax
no multicast group port interfaceSpecifier limit
Command introduced before JUNOSe Release 7.1.0.
Release Information
Limits the number of IGMP or MLD groups that a port can accept. The no version
Description
restores the default situation, in which there is no limit to the number of IGMP or
MLD groups the port can accept.
Options
Global Configuration
Mode
1442
multicast group port limit
interfaceSpecifier Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
groupLimit Maximum number of IGMP or MLD groups that an interface can
accept in the range 0–64,000