Multicast - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

multicast

multicast { permit | deny }
Syntax
no multicast
Command introduced before JUNOSe Release 7.1.0.
Release Information
Modifies the subscriber policy for the multicast protocol to define whether the
Description
subscriber (client) interfaces that belong to a bridge group or to a VPLS instance
forward (permit) or filter (deny) multicast packets. The no version restores the default
value, permit multicast packets.
You cannot change the default subscriber policy values for trunk (server) interfaces
that belong to a bridge group or to a VPLS instance. You also cannot change the
default subscriber policy values for a VPLS virtual core interface, which acts as a
trunk interface. The VPLS virtual core interface represents all of the MPLS tunnels
from the router to the remote VPLS edge (VE) devices.
Options
Subscriber Policy Configuration
Mode
permit Specifies that the subscriber interface associated with the bridge group
or VPLS instance forwards multicast packets
deny Specifies that the subscriber interface associated with the bridge group
or VPLS instance filters multicast packets
Chapter 13: M Commands
1441
multicast