Mroute Port Limit - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

mroute port limit

mroute port portNumber limit limitValue
Syntax
no mroute port portNumber limit
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures a limit on the number of outgoing interfaces (OIFs) containing IPv4 or
Description
IPv6 mroutes, across different virtual routers, on a port. The no version removes
any OIF port limits.
Options
Global Configuration
Mode
portNumber Port number in the form slot/port.
limitValue Limit on the number of outgoing interfaces containing IPv4 or IPv6
mroutes, across different virtual routers, on a port. The default is no limit.
Chapter 13: M Commands
1437
mroute port limit