Mroute Port Admission-Bandwidth-Limit - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mroute port admission-bandwidth-limit

mroute port portNumber admission-bandwidth-limit limitValue
Syntax
[ priority-bandwidth-limit priorityBandwidthValue ] [ hysteresis hysteresisValue ]
no mroute port portNumber admission-bandwidth-limit
Command introduced in JUNOSe Release 7.1.0.
Release Information
hysteresis and priority-bandwidth limit keywords and hysteresisValue and
priorityBandwidthValue variables added in JUNOSe Release 8.2.0.
Configures a limit on the admission bandwidth of outgoing interfaces (OIFs) containing
Description
IPv4 or IPv6 mroutes, across different virtual routers, on a port. The no version
removes any OIF admission bandwidth limits.
Options
Global Configuration
Mode
1436
mroute port admission-bandwidth-limit
portNumber Port number in the form slot/port.
limitValue Limit on the admission bandwidth (in bits per second) of outgoing
interfaces containing IPv4 or IPv6 mroutes, across different virtual routers, on
a port. The default is no limit.
priorityBandwidthValue
The default is no limit.
hysteresisValue Minimum priority bandwidth limit before the system evaluates
mroutes and admits any blocked OIFs; in the range 0-100 percent.
Minimum value of admitted priority bandwidth in bps.