Ip Sa-Validate Trap-Enable - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip sa-validate trap-enable

Syntax
Release Information
Description
Options
Mode
938
[ no ] ip sa-validate [ vrf vrfName ] trap-enable
Command introduced in JunosE Release 7.1.0.
Enables the generation of source address validation failure traps. The no version disables
the generation of source address validation failure traps.
vrfName—Name of the VRF; string of 1–32 alphanumeric characters
Global Configuration
Copyright © 2010, Juniper Networks, Inc.