Ip Rsvp Signalling Hello - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip rsvp signalling hello

Syntax
Release Information
Description
Mode
936
{ ip | mpls } rsvp signalling hello
[ refresh { interval helloInterval | misses helloMisses } ]
{ no | default } { ip | mpls } rsvp signalling hello
Command introduced in JunosE Release 7.3.0.
Turns on or configures RSVP-TE hello support. See the mpls rsvp signalling hello
command for a complete description and syntax.
Global Configuration, Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.