Ip-Router-Name - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip-router-name

Syntax
Release Information
Description
Options
Mode
930
[ no ] ip-router-name [ vrName ]
Command introduced in JunosE Release 9.0.0.
Assigns an IPv4 virtual router. The no version restores the default router.
NOTE: This command replaces the deprecated router-name command,
which may be removed completely in a future release.
vrName—Name of the virtual router; string of 1–32 alphanumeric characters
Domain Map Configuration
Copyright © 2010, Juniper Networks, Inc.