ip re-authenticate-auto-detect ip-subscriber
Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
ip re-authenticate-auto-detect ip-subscriber
no ip re-authenticate-auto-detect ip-subscriber
Command introduced in JunosE Release 10.0.0.
Re-authenticates the auto-detected subscribers (dynamic subscriber interfaces) created
on static and dynamic IP subscriber interfaces using the DHCP options dhcp-options,
dhcp-gi-address, and dhcp-mac-address when the DHCP external application manages
the subscriber addresses following a cold boot. The no version negates the command
or restores the defaults.
Interface Configuration, Profile Configuration
Chapter 10: I Commands
913