Ip Pim Ssm - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip pim ssm

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip pim ssm [ default | range ipAccessList ]
no ip pim ssm
Command introduced before JunosE Release 7.1.0.
Enables SSM and defines the SSM range of IP multicast addresses. The no version
disables SSM on the router.
default—Specifies that SSM use the IANA-specified range of 232/8
ipAccessList—Name of the IP access list that specifies the range of multicast addresses
you want SSM to use
Global Configuration
Chapter 10: I Commands
903