ip pim rp-address
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ip pim rp-address ipAddress [ ipAccessList ] [ override ]
Command introduced before JunosE Release 7.1.0.
Specifies a static PIM group–to–RP mapping. The no version clears the mapping from
this interface.
ipAddress—IP address of the router you want to designate as an RP router
ipAccessList—Name of the IP access list that specifies which multicast groups use this
RP
override—Specifies that this static RP mapping has priority over group-to-RP mappings
learned by auto-RP
Global Configuration
Chapter 10: I Commands
897