Ip Address Table Details - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1 Manual

IP Address Table
Details
Table 3-1 System Details (continued)
S.No System Details Description
7. SysServices
For example, sample output may include:
The IP address table details includes:
Table 3-2 IP Address Table Details
IP Address Table
S.No Details
1. ipAdEntIfIndex
STRM SNMP Agent
Specifies the set of services that this entity offers. The
value is a sum. By default, this sum is initially zero (0).
Then, for each layer, L, in the range 1 through 7, that this
node performs transactions for, 2 raised to (L - 1) is
added to the sum. For example, a node which performs
primarily routing functions would have a value of 4
(2^(3-1)). In contrast, a node which is a host offering
application services would have a value of 72 (2^(4-1) +
2^(7-1)). Note that in the context of the Internet suite of
protocols, values should be calculated accordingly:
Layer functionality:
1 - Physical, for example, repeaters.
2 - Datalink/subnetwork, for example, bridges.
3 - Internet, for example, IP gateways.
4 - End-to-end, for example, IP hosts.
7 - Applications, for example, mail relays.
For systems including OSI protocols, layers 5 and 6 may
also be counted."
Description
Specifies the index value that uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this index
is the same interface as identified by the same value
of ifIndex.
IP Details 27