FujiFilm CR-IR341 Service Manual page 96

1 2
C
ONTENTS
IP Reverse Conveyance
After the path changeover guide is activated, the IP is conveyed to the inlet of the erasure
conveyor by the driving of MF1.
Guide
SOLF1
ON
SOLF1
IP Erasure
For the IP conveyed to the erasure conveyor, the image data of that IP is erased by the
erasure lamps.
Five erasure lamps are used to erase the image data of the IP. In order to maintain a re-
quired level of light intensity for the erasure lamps, the turn-on of the erasure lamps is
initiated immediately after the completion of the IP length measurement performed by the
before-side-positioning conveyor, thereby making erasure preparation.
For the IP conveyed to the erasure unit, its image data is erased by the erasure lamps.
009-051-04
05.31.99 FM2460
3 4 5 6
Guide
Lamp
IP
CR-IR341 Service Manual
7 8 9 10
IP path
FR1H0227.EPS
FR1H0228EPS
MD - 33
MD - 33