FujiFilm CR-IR341 Service Manual page 456

C 1 2
ONTENTS
Improper image (5)
No. 205
• Although the film characters and border are
outputted normally, the image itself is not
generated properly, with the same data appearing
continuously in the vertical direction.
No. 206 Improper film characters (1)
• Although the image and border are outputted
normally, the film characters are not generated
properly.
009-051-04
05.31.99 FM2460
3 4 5 6
CR-IR341 Service Manual
<Probable Cause>
• Any of the SCN08A, IMG07B, IMG08A, IMG08B,
IMG08C, and MTH08A boards is faulty.
<Check and Reference>
• Reset the machine, or power OFF the machine
and then back ON again, to perform self-
diagnostics during machine initialization. If the
results of the self-diagnostics indicate an error,
replace the relevant board.
"SCN08A Board"
<Probable Causes>
• The Kanji ROM on the CPU90E board and/or the
font file is corrupted.
• The memory on the IMG08A board is faulty.
<Check and Reference>
• Reset the machine, or power OFF the machine
and then back ON again, to perform self-
diagnostics during machine initialization. If the
results of the self-diagnostics indicate an error,
replace the relevant board.
"Replacing and Adjusting CPU90E Board"
MT - 187
FR1H1864.EPS
FR1H1865.EPS
MT - 187