FujiFilm CR-IR341 Service Manual page 945

C 11 12
ONTENTS
16. Software Installation Procedures
The software is supplied on floppy disks (abbreviated FDs). If the hard disk has been
replaced, format it before installing the software.
Installation FDs
All the installation FDs are DOS 1.44MB formatted, 3.5-inch floppy disks. Two system disks
are supplied in addition to data disks. The number of data disks varies with the software
version.
Before installing the software, check that the installation FDs are supplied as indicated in the
following list.
Name
System disk Format
Install
Data disk Appl
PC MENU EDITOR
009-051-07
08.30.2001 FM3115
13 14 15 16
Storage device number
114Y5431001A
114Y5431002A
114Y5431003A
114Y5431010A
CR-IR341 Service Manual
17
Quantity
1 disk (1st disk of the 2-disk set)
1 disk (2nd disk of the 2-disk set)
One set (This number varies with
the software version.)
One set (This number varies with
the software version.)
MU - 154
Use
For hard disk formatting
For installation
For application software
Software for editing the
image processing
parameters and CSL type
menu settings
TR1B1001.EPS
MU - 154