FujiFilm CR-IR341 Service Manual page 847

1 2
C
ONTENTS
7.8 NETWORK HOST INTERFACE (DEVICE)
It may define functions, communication protocols, and transfer rates of each host. The host
must be a device that is connected to a network.
Format
HostName : Attr|Attr,[Protocol ID],[System code],[Speed]
HostName (host name)
• Host name that is set in the HOSTS file.
"7.9 HOSTS ADDRESS (HOSTS)"
Attr (attribute)
One of the following should be designated. Multiple attributes can be designated by delimit-
ing them by "|".
• PRINT
• HD_FILE
• DISPLAY
• OD_FILE
Protocol ID (protocol identification number)
It is set in four hexadecimal digits. It may be omitted by entering ",". When it is omitted, it is
set to "0100 (FINP)".
• 0001
• 0100,0110
• 0200
If it is necessary to use the image processing exclusive selection flag, the protocol
identification number needs to be set to either "0100", "0110", or "0200".
System code (system type code)
It is set in two hexadecimal digits. It may be omitted by entering ",".
Speed (transfer speed)
It is set in decimal notation. It may be omitted by entering ",". When it is omitted, it is set to
"8".
009-051-05
009-051-06
11.20.99 FM2638
04.20.2001 FM3006
3 4 5 6
Film output enabled
Active file enabled
Display function
Archive file enabled
DMSP
FINP (Fuji integrated network protocol)
Base on DICOM
CR-IR341 Service Manual
7 8 9 10
MU - 56
MU - 56