FujiFilm CR-IR341 Service Manual page 789

1 2
C
ONTENTS
3. How to Activate and Exit M-Utility
3.1 Activating M-Utility
M-Utility can be started in one of the following different manners.
When the software version number is displayed during initialization process
Touch the upper left-hand corner of the operation panel, and then, within two seconds, touch
the upper right-hand corner.
M-Utility starts.
When the screen reads STEP95, the operation panel is inoperative and does not
respond at all even if you touch it. In such an instance, perform a reset and wait until
the software version number appears on the screen.
: Location to be touched
009-051-04
05.31.99 FM2460
3 4 5 6
C R - I R 3 4 1
Copyright (c) 1998 Fuji Photo Film Co.,Ltd
Software ID : 114Y5431003
Software Version : A07
CR-IR341 Service Manual
7 8 9 10
Software version number
MU - 6
FR1H1392.EPS
MU - 6