FujiFilm CR-IR341 Service Manual page 160

C 1 2
ONTENTS
(4) Sequence of After-Erasure Conveyance
In this sequence, after the IP is erased, it is fed to the up-down IP removal unit via the
before-side-positioning conveyor.
This operation is collaboratively performed by the erasure conveyor, before-side-positioning
conveyor, and up-down IP removal unit.
Fig. 2.9.4 After-Erasure Conveyance
Preprocessing: Fig. 2.9.1
START
Order
of activation
Y
Y
END
Table 2.9.4 Operation Parameters
Symbol
PB23
Conveyance (after-erasure conveyance)
PC12 Conveyance (after-erasure conveyance)
PF15
Conveyance (after-erasure conveyance)
TB21
After-erasure conveyance timeout
TF17 After-erasure conveyance IP trailing-edge detection timeout 1
TF18
After-erasure conveyance IP trailing-edge detection timeout 2
009-051-04
05.31.99 FM2460
3 4 5 6
After-erasure conveyance
DRIVE (SOLC1/ON)
DRIVE (MF1/PF15)
DRIVE (MC1/PC12)
DRIVE (MB2/PB23)
TF18 START
TF17 START
TF21 START
Is SF3 opened
within TF17?
N
If the IP is small, the initial value of SF4 may be OPEN.
N
Y
N
Y
Is SB2 closed
within TB21?
N
After-erasure conveyance stop
DRIVE (MF1/OFF) (soft)
DRIVE (MC1/OFF) (soft)
DRIVE (MB2/OFF) (soft)
DRIVE (SOLC1/OFF)
DRIVE (SOLF/OFF)
MF1, MC1, MB2
excitation OFF
03D6
Description
CR-IR341 Service Manual
7 8 9 10
Is SC2 opened within TF18?
Is SB2 closed?
Level 0 error
Conveyance error
(after erasure)
Value
- infinite p
+ infinite p
+ infinite p
3.6 sec
2.2 sec
2.8 sec
TR1H0042.EPS
MD - 97
After-erasure conveyance stop
DRIVE (MF1/OFF) (soft)
DRIVE (MC1/OFF) (soft)
DRIVE (MB2/OFF) (soft)
DRIVE (SOLC1/OFF)
DRIVE (SOLF/OFF)
MF1, MC1, MB2
excitation OFF
Level 0 error
Convergence path
03D7
changeover guide operation
error
MD - 97
FR1H0374.EPS