FujiFilm CR-IR341 Service Manual page 313

Fuji computed radiography
Table of Contents

Advertisement

C
1
2
3
4
ONTENTS
Code
Name
3CE2
BIND function error
3CE3
LISTEN function error
3CE4
ACCEPT function error
3CE5
Connect error
3CE6
Transmission completion error
3CE7
Reception completion error
3CE8
Socket number zero
3CE9
Not transferable to reception task
3CEA
Multi-frame timeout
3CEB
All image data not received
3D40
Line error
009-051-04
05.31.99 FM2460
5
6
Significance/Occurrence Condition
An error occurs with the BIND function (js_bind).
An error occurs with the LISTEN function (js_listen).
An error occurs with the ACCEPT function (js_accept).
A request for control line connection fails.
A transmission of the FINP command fails.
An error occurs during data reception from the target end.
The socket number acquired with the socket acquisition
function (js_socket) is zero.
A message cannot be transferred to the reception task due to
illegal socket number.
More than 90 seconds have elapsed until the next frame of
data is received after one frame of data is received during
multi-frame image reception.
Image data to be received has not yet been received for all
sizes, but the receive process is completed.
The TCP/IP connection is disconnected.
CR-IR341 Service Manual
Detail: Denotes the detail information format.
Probable Cause/Remedy
Information for LAN task analysis
Information for LAN task analysis
Information for LAN task analysis
Check the Ethernet cable; the Ethernet cable is faulty;
or the CPU90F board is faulty.
Check the Ethernet cable; the Ethernet cable is faulty;
or the CPU90F board is faulty.
Check the Ethernet cable; the Ethernet cable is faulty;
or the CPU90F board is faulty.
Information for LAN task analysis
Information for LAN task analysis
Check the Ethernet cable; the Ethernet cable is faulty;
the CPU90F board is faulty; or check the sending status
of the multi-frame data on the target end.
The CPU90F board is faulty.
• Check the Ethernet cable connection.
• The Ethernet cable is faulty.
• The CPU90F board is faulty.
• Check the power supply of the output designation host.
MT - 50
Detail
Refer to
M-4
M-4
M-4
M-3
M-3
M-3
M-3
M-3
G-2
TR1H1265.EPS
MT - 50

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cr-ir341pFcr 5000Fcr 5000plus

Table of Contents