FujiFilm CR-IR341 Service Manual page 170

C 1 2
ONTENTS
(3) Reading Sequence
This is for the operation of the
subscanning unit.
It is the reading sequence during
secondary erasure.
Fig. 3.3.3 Reading (Secondary Erasure)
IP feed permission
Is SZ2 closed
within TZ24?
Driving shaft
grip release
Driving shaft
(fast)
grip release stop
DRIVE (MZ2/OFF)
(soft)
Level 0 error
03C8
Driving shaft grip
release error
009-051-04
05.31.99 FM2460
3 4 5 6
Preprocessing: Fig. 3.3.1
START
Reading secondary
erasure conveyance
DRIVE (MZ1/ON)
DRIVE (MD3/PD37)
DRIVE (ME2/PE22)
Is SD3 opened within TD36?
N
Y
DELAY TZ17
Reading secondary
erasure conveyance stop
DRIVE (MZ1/OFF) (soft)
DRIVE (MD3/OFF) (soft)
DRIVE (ME2/OFF) (soft)
DELAY TZ18
Driving shaft grip
release driving
DRIVE (MZ2/ON)
N
Y
Driving shaft grip
release stop
DRIVE (MZ2/OFF)
(hard)
END
CR-IR341 Service Manual
7 8 9 10
Reading secondary
erasure conveyance stop
DRIVE (MZ1/OFF) (soft)
DRIVE (MD3/OFF) (soft)
DRIVE (ME2/OFF) (soft)
03C1
No wait for completion
of driven shaft slow grip
Driven shaft grip
release driving
DRIVE (MD3/ON)
TZ31 START
Timer START
Is SZ3 opened
within TZ31?
N
Y
Driven shaft grip
release stop
DRIVE (MZ3/OFF)
(hard)
Timer STOP
Timer > TZ33 or Timer <TZ32
Y
N
MD - 107
Level 0 error
Conveyance error
(reading conveyance)
Conveyance grip release
(HP return)
DRIVE (MD2/PD23)
Driven shaft grip
release stop
DRIVE (MZ3/OFF)
(soft)
Level 0 error
03C7 Driven shaft grip
release error
Error log
(detailed information)
Timer data recording
Level 2 error
Driven shaft grip
23C7
release
operation error
MD - 107
Driven
shaft
grip
release
(ST)
FR1H0392.EPS