FujiFilm CR-IR341 Service Manual page 156

C 1 2
ONTENTS
2.8 Movement of Elevation Unit (Load)
(1) Overall/General Sequence
In this sequence, the elevation unit is moved to a designated shelf of the cassette set unit in
order to feed IPs.
This sequence cannot be performed if the suction cups are not in their home position.
For more detail, see Section 2.3 "Movement of Elevation Unit (Feed)."
Fig. 2.8.1 Movement of Elevation Unit (Load)
The suction cup
HP is confirmed.
Same as in
Fig. 2.3.1
MB3 moves the
elevation unit to
a designed shelf.
For its parameters,
see Table 2.8.1a.
It is confirmed
that the elevation
unit is in a proper
shelf position.
To sequence initiation
requirement in Fig. 2.10.1
Table 2.8.1 Operation Parameters
Symbol
PB14
Suction cup movement (HP
PB19
Suction cup movement (HP
TB17
Wait for next operation
NB101
Elevation movement retry
009-051-04
05.31.99 FM2460
3 4 5 6
Preprocessing: Fig. 2.1.1, Fig. 3.1.1, Fig. 5.6.1, Fig. 5.7.1, Fig. 5.8.1
START
Is the movement of the elevation unit permitted?
N
Y
Is SB1 closed?
N
Y
Movement of elevation unit
DRIVE (MB1/PB_)
Is SB3 closed?
N
Y
Suction cup movement
(HP load standby)
DRIVE (MB1/PB14)
IP load permission OK
END
Description
load standby)
feed leak)
TR1H0038.EPS
CR-IR341 Service Manual
7 8 9 10
(Sequence initiation requirement)
Initiation is awaited under the following
condition.
¥ The process waits until the next cassette
23E8
DELAY TB17
Fig. 2.3.2
Suction cup movement
(HP
DRIVE (MB1/PB19)
A
Fig. 2.3.3
Retry at the
time of shelf
position
Y
detection
N
failure
23DE
A
Table 2.8.1a Elevation Unit Movement Parameters (PB_)
Topmost stage
Topmost stage
Topmost stage
2nd stage
2nd stage
2nd stage
3rd stage
3rd stage
Value
86 p
3rd stage
-12 p
4th stage
0.1 sec
4th stage
2 times
4th stage
is set and reading preparation for the IP
in that cassette is completed.
Level 2 error
Suction cup HP return error
Suction cup HP positioning
feed leak)
Elevation unit HP positioning
Is the number of retries made greater
than the retry count (NB101)?
Level 0 error
03DE
Elevation shelf
Level 2 error
movement error
Elevation shelf
movement error retry
Movement of
Symbol
elevation unit
2nd stage PB112
3rd stage PB113
4th stage PB114
topmost stage PB121
3rd stage PB123
4th stage PB124
topmost stage PB131
2nd stage PB132
4th stage PB134
topmost stage PB141
2nd stage PB142
3rd stage PB143
MD - 93
Retry at the time
of HP detection
failure
FR1H0366.EPS
Pulse
count (P)
-3,462
-6930
-10,392
3,470
-3,460
-6,922
6,930
3,460
-3,462
10,392
6,922
3,462
TR1H0039.EPS
MD - 93