FujiFilm CR-IR341 Service Manual page 155

C 1 2
ONTENTS
(7) Sequence of CSL/IDT Information Check 2
This is the process performed by the controller.
It is performed in response to the result of the sequence described in 2.7 (6) "Sequence of
CSL/IDT Information Check" performed at the end of BCR reading and side-positioning.
If the ID information is obtained normally, the process continues.
Fig. 2.7.7 CSL/IDT Information Check 2
Preprocessing: Fig. 2.7.1, and Fig. 3.3.1
009-051-04
05.31.99 FM2460
3 4 5 6
START
CSL: Logical reading and high-sensitivity
reading are disabled in Config Setting.
IDT or CSL: Logical reading or high-sensitivity
reading is enabled in Config Setting.
Wait for ID information registration?
N
Y
Wait for ID information
registration from IDT
END
CR-IR341 Service Manual
7 8 9 10
MD - 92
Wait for
CSL input
FR1H0365.EPS
MD - 92