FujiFilm CR-IR341 Service Manual page 838

1 2
C
ONTENTS
"24. OS" (DR compression enabled/disabled for reoutput)
Use to switch whether enable/disable of DR compression for image reoutput complies
with image information or with machine setting.
"25. RF" (right/left character display reversal)
When set to 1, a reversed character of "R" is displayed with reversal enabled. When
set to 2, either "AP" or "PA" is displayed for all images according to the exposure unit
and method used.
"38. IN" (examination number display)
Used to set whether to display the examination number within the ID card. Permission
from the Service Headquarters is required before changing the parameter.
"40. LTC" (use of long type format)
It sets whether to use the long type format as the film character format. When it is set
to "1: YES", the long type format is used, so that right or left justification of characters
complies with the selection in "47. JSTFY" of "SYSTEM (IRSET.CFG)".
SUPPLEMENTARY NOTE
The long type format function is intended to extend the number of characters outputted to the
HI-C655QA, film, and operation panel. When this function is used, the long character output
is enabled in the setting of IDT-IV (A07/B07 or later).
"41. FRSC" (setting of film output with frame/without ruler): Software
version A10 or later
Used to determine whether to output film with frame/without ruler. It is set by the MPM
code.
Up to eight MPM codes may be set. However, if "without frame" is set in FRT1/FR2/
FR4, the resulting film output is without frame/without ruler.
Only when "with frame" is set in FRT1/FR2/FR4, the setting defined in FRSC is
effective.
Setup example 1)
FRSC= "0000 0200 XXXX XXXX XXXX XXXX"
With MPM codes of 0000 and 0200 only, the film output is "with frame/without ruler".
Setup example 2)
FRSC= "???? XXXX XXXX XXXX XXXX XXXX"
With all the MPM codes, the film output is "with frame/without ruler".
Setup example 3)
FRSC= "020? XXXX XXXX XXXX XXXX XXXX"
With MPM codes of 0200-020F only, the film output is "with frame/without ruler".
009-051-06 009-051-05
04.20.2001 FM3006
11.20.99 FM2638
3 4 5 6
CR-IR341 Service Manual
7 8 9 10
MU - 47
MU - 47