FujiFilm CR-IR341 Service Manual page 544

1 2
C
ONTENTS
(3) Loosen the single hex socket head bolt that retains the inch rearward toppling
prevention bracket.
(4) Make adjustment as appropriate so that the descent of the trailing edge of the movable
roll is 1 mm or less.
By sliding the rearward toppling prevention bracket in the direction of arrow as shown
below (toward the trailing edge of the movable roll), the descent of the trailing edge of
the movable roll is decreased.
Top view
The descent is decreased.
Side view
009-051-04
05.31.99 FM2460
3 4 5 6
Trailing edge of movable roll
Inch movable roll
(4)
Inch rearward toppling
prevention bracket
(3)
Hex socket head bolt with spring and
plain washer
M4x10
Slightly push the trailing edge of the movable roll.
Movable roll
CR-IR341 Service Manual
7 8 9 10
FR1H1764.EPS
Movable roll
Ensure that it is 1 mm or less.
Movable roll support guide
MC - 53
FR1H1766.EPS
MC - 53