FujiFilm CR-IR341 Service Manual page 263

1 2 3 4
C
ONTENTS
2.2 Error Codes List
Code Name
200
Failure to discard image in a queue
0100
Board inserted location error
ID information management system
0101
initialization error
Shared data management system
0102
initialization error
Image management system initialization
0110
error
0111
HD image area initialization error
0112
No valid option
0120
File open error
0121
File read error
0122
File close error
009-051-04 009-051-06
04.20.2001 FM3006
05.31.99 FM2460
5 6
Significance/Occurrence Condition
Using U-Utility, an attempt is made to discard an image in
a queue, but fails.
When the board's inserted slot location is checked, an error
occurs.
An error occurs during initialization of the ID information
management system.
An error occurs during initialization of the shared data
management system.
An error occurs during initialization of the image management
system.
An error occurs during initialization of the HD image area.
Allocation of shared memory to a bare minimum optional
configuration fails.
An attempt to open a file fails. (netmasks)
An attempt to read a file fails. (netmasks)
An attempt to close a file fails. (netmasks)
CR-IR341 Service Manual
Detail: Denotes the detail information format.
Probable Cause/Remedy
The HDD itself is faulty.
Each board, which must be inserted in its specific
location on the motherboard, is inserted in a wrong
location.
An attempt is made to load a file during initialization
of the ID information management system, but an error
occurs.
• No file
• Improper file content/file corrupted.
• HD failure
An attempt is made to load a file during initialization
of the shared data management system, but an error
occurs.
• No file
• Improper file content/file corrupted.
• HD failure
HD failure
HD failure
• Insufficient shared memory
• Shared memory failure
• No file
• HD failure
• Failure to reserve memory
HD failure
HD failure
MT - 4
Detail Refer to
–
A-8
F
F
F
F
F
A-1
A-1
A-1
TR1H1218.EPS
MT - 4