FujiFilm CR-IR341 Service Manual page 299

1 2 3 4
C
ONTENTS
Code Name
2754
File read error
2755
File close error
2756
Image processing parameter error
2757
Image processing parameter error
2758
Image processing parameter error
2800
Serial line test error
Undefined/unexpected command
2801
received
2802
No response from LP
2803
LP receive command parameter error
2804
Old I/F 14" x 17"/B4 unit judgement error The film used on the LP cannot be judged.
HYPER-DRC+USM image processing
2805
ignored
2806
HYPER-USM image processing ignored
2807
PEM image processing ignored
009-051-04
05.31.99 FM2460
5 6
Significance/Occurrence Condition
An attempt to read a file fails.
An attempt to close a file fails.
Parameter file checksum error
Parameter file format error
Parameter file setup value error
During line test, the character string transmitted is
inconsistent with the character string received.
An unexpected command is received.
There is no response to transmission.
The content of the text received is inconsistent.
The HYPER-DRC+USM image parameter is inputted,
but the IMG08B board is not installed.
The HYPER-USM image parameter is inputted, but the
IMG08B board is not installed.
The PEM image parameter is inputted, but the IMG08B board
is not installed.
CR-IR341 Service Manual
Detail: Denotes the detail information format.
Probable Cause/Remedy
HD failure
HD failure
The IDT setup value is improper.
The IDT setup value is improper.
The IDT setup value is improper.
Check the serial line.
It this phenomenon occurs frequently, check the LP.
• Check the LP cable
• Restart the LP
• Check the LP cable
• Restart the LP
• Check the LP cable
• Check the LP.
Check the image parameter, or install the IMG08B
board.
Check the image parameter, or install the IMG08B
board
Check the image parameter, or install the IMG08B
board.
MT - 36
Detail Refer to
A-1
A-1
A-1
A-1
A-1
I-8
I-8
I-8
I-8
I-8
I-9
I-9
I-9
TR1H1250.EPS
MT - 36