FujiFilm CR-IR341 Service Manual page 851

1 2
C
ONTENTS
7.10 DISTRIBUTION (CODEDSTB)
It sets the distribution destination for network connection. One distribution code should be
defined per line. Up to 128 lines of distribution code can be defined.
Format
Code Host Name (
" " denotes a space."
Code (distribution destination code)
A distribution destination code is set in eight alphanumeric characters or "?". "?" denotes a
match with any one character.
Host Name (host name)
The host name that is set in the HOSTS file should be set. Up to four host names can be set
by delimiting them with a space.
"7.9 HOSTS ADDRESS (HOSTS)"
Setup Example
The distribution code is set.
HI-C
An example of description (bold faced) for the above setup is presented below.
| #
| # Codedstb
| #
| # Code Host Name [HostName]...
| AA0123?? hic654
Precaution When Used as CR-IR341P System
When connected as the CR-IR341P to the CR-IR348CL, DISTRIBUTION is used in a differ-
ent manner than with the CR-IR341 system (setting of distribution for network connection).
With the CR-IR341P, DISTRIBUTION is set only if multiple CR-IR348CL units are connected
to the CR-IR341P.
"Appendix 9 Procedures for Connecting with CR Console (CR-IR348CL)" in "Installation
Volume"
009-051-07
08.30.2001 FM3115
3 4 5 6
. . .
HostName
AA0123??
CR-IR341 Service Manual
7 8 9 10
)
MU - 60
|
|
|
|
|
MU - 60