FujiFilm CR-IR341 Service Manual page 266

1 2 3 4
C
ONTENTS
Code Name
03A3
Degeneration for all shelves
03A8
Out-of-spec initial IP size
Feed/load conveyance remaining IP
03B0
ejectionfailure
03B1
Feed conveyance error
03B2
Load conveyance error
Side-positioning conveyor inlet
03B3
conveyance error
03B4 Recovered IP load slow conveyance error The IP is conveyed toward the cassette set unit, but SB2
03B5 Recovered IP load fast conveyance error The IP is conveyed toward the cassette set unit, but SB2
Feed/load conveyance remaining IP
03B6
ejection error
Side-positioning conveyance remaining
03B7
IP ejection error
03B8
IP position information error
009-051-04 009-051-06
04.20.2001 FM3006
05.31.99 FM2460
5 6
Significance/Occurrence Condition
Cassette hold release is performed during initialization or
during machine operation, but hold release for all the shelves
(SA3, 7, 11, and 15 do not turn OFF) cannot be detected.
Measurement is made on the length of the remaining IP
during initialization, but the result is detected as out-of-spec.
After the IP is conveyed from the cassette and passes over
SB2, SC1 does not turn ON. Or, SC1 turns ON, but is not
turned OFF.
The IP conveyed from the erasure conveyor turns ON SB2,
but after its passage, SB2 does not turn OFF.
During IP feed conveyance, after the IP passes over SC1,
SD3 cannot detect the IP.
remains ON.
does not turn ON.
Because SB2 is turned ON during initialization, MF1, MC1,
and MB2 are driven, but SB2 does not turn OFF.
Because SC1 is turned ON during initialization, conveyance
operation is performed, but SC1 does not turn OFF.
CR-IR341 Service Manual
Detail: Denotes the detail information format.
Probable Cause/Remedy Detail
MT - 7
Refer to
MD - 61, 138,
D-5
139, 152,
MT - 74
D-5 MT - 76
D-5
MD - 136
MD - 72,
D-5
MT - 78
MD - 99,
D-5
MT - 80
MD - 76,
D-5
MT - 82
MD - 157,
D-5
MT - 84
D-5 MD - 157,
MT - 86
MD - 124, 125,
D-5
126, 135, 140,
141, MT - 88
MD - 131, 132,
D-5
133, MT - 90
D-5 MT - 92
TR1H1221.EPS
MT - 7