C
1
2
ONTENTS
5.
Machine Operation During Conveyor Initialization
5.1
Summary of Operation
Normally, the machine takes about four minutes to boot up, and every time it automatically
searches for any remaining IP left in the machine and ejects it.
It is not until the remaining IP is ejected or it is checked to see that there is no remaining IP
left in the machine that the initialization self-diagnostics are completed. This section only
addresses sequences that are different than in the routine operation (single-IP conveyance).
009-051-04
05.31.99 FM2460
3
4
5
6
CR-IR341 Service Manual
7
8
9
10
MD - 117
MD - 117