FujiFilm CR-IR341 Service Manual page 287

1 2 3 4
C
ONTENTS
Code Name
2044
HD access error
2045
File open error
2046
File write error
2047
File close error
2048
File area reservation error
2049
Image file access timeout (for analysis)
204A
Image file access error
204B
Image file access timeout
204C
Image file access retry over
009-051-07
08.30.2001 FM3115
5 6
Significance/Occurrence Condition
A HD access error occurs when the format information of the
HD image area is read or when the image management
information is read.
An error occurs when the log file is opened.
An error occurs when the log file is written.
An error occurs when the log file is closed.
An attempt to reserve an area to output the log file fails.
Because a timeout occurs during image file access,
the SCSI is reset and image file access is retried.
An error is detected during image file access, so that the
SCSI is reset and an image file access retry is performed.
A timeout occurs during image file access.
The number of retries for image file access due to 204A
exceeds the specified limit.
CR-IR341 Service Manual
Detail: Denotes the detail information format.
Probable Cause/Remedy
• The file in the HDD is corrupted.
• The HDD itself is faulty.
• The file in the HDD is corrupted.
• The HDD itself is faulty.
• The file in the HDD is corrupted.
• The HDD itself is faulty.
• The file in the HDD is corrupted.
• The HDD itself is faulty.
The main memory is insufficient.
• The MTH board or shared memory is faulty.
• The shared memory is insufficient relative to the option
implemented.
Faulty HDD, MTH board, etc.
Faulty HDD, MTH board, etc.
Faulty HDD, MTH board, etc.
MT - 28
Detail Refer to
e-4
A
A
A
A
e-3
e-5
e-6
e-5
TR1H1242.EPS
MT - 28