FujiFilm CR-IR341 Service Manual page 441

C 1 2
ONTENTS
Remedy 5
Jam location:
Cause:
IP status:
Recovery procedure
a
Gain access from the front or right-hand side of the machine.
(1) Remove the upper front cover.
(2) Pull out the tray of cassette set unit.
"4.1 Pulling Out and Pushing In Tray of Cassette Set Unit"
(3) Release the side-positioning conveyor grip.
(4) Rotate the before-side-positioning conveyor rollers by hand to remove the IP from the
top (frame slit) of the before-side-positioning conveyor.
b
Gain access from the rear or right-hand side of the machine.
(1) Remove the rear cover.
(2) Remove the rear guide from the before-side-positioning conveyor.
(3) Release the side-positioning conveyor grip.
(4) Rotate the before-side-positioning conveyor rollers by hand to remove the IP.
Remedy 6
Jam location:
Cause:
IP status:
Recovery procedure
The same recovery procedure is to be performed no matter whether the IP is stopped
in the side-positioning conveyor, subscanning unit, or after-reading conveyor.
Gain access from the right-hand side of the machine.
(1) Remove the right-hand side cover from the machine.
(2) Pull out the scanner unit and then remove the IP.
If the IP in the subscanning unit cannot directly be accessed, first remove the light-
collecting guide and then the IP.
009-051-04
05.31.99 FM2460
3 4 5 6
Before-side-positioning conveyor or side-positioning conveyor
Conveyance failure
A certain portion of the jammed IP is located in the before-side-position-
ing conveyor with the remaining portion placed in the side-positioning
conveyor. Therefore, these two units cannot be pulled out.
a) The IP cannot be conveyed forward but can be conveyed backward.
b) The IP cannot be conveyed forward or backward.
Side-positioning conveyor, subscanning unit, or after-reading conveyor
Conveyance failure
a) The IP cannot be conveyed forward but can be conveyed backward.
b) The IP cannot be conveyed forward or backward.
CR-IR341 Service Manual
MT - 172
MT - 172