FujiFilm CR-IR341 Service Manual page 792

1 2
C
ONTENTS
3.2 Exiting M-Utility
To quit M-Utility, select "0. QUIT" while the main menu is displayed. If the configuration file
has been edited using M-Utility, make your editing effective by resetting the machine after
you exit M-Utility.
NOTE
If M-Utility is entered during the initialization sequence, "0. QUIT" does not appear. Thus,
after quitting M-Utility, the machine should be reset.
(1) While the M-Utility main menu is displayed, select "0. QUIT".
The display switches to the U-Utility screen.
(2) Press the reset button.
The reset button should basically be pressed. You may touch the "Return" button only
in cases where the automatic transport mode setup would be invalidated by a reset.
009-051-04
05.31.99 FM2460
3 4 5 6
CR-IR341 Service Manual
7 8 9 10
MU - 9
MU - 9