FujiFilm CR-IR341 Service Manual page 657

1 2
C
ONTENTS
Removal
(1) Pull out the scanner unit.
"7. Pulling Out and Pushing In Scanner Unit"
(2) Disconnect the connectors. (PMT08A CN1, 2)
(3) Remove the brace that retains the light-collecting guide assembly retaining bracket.
(4) Remove the arm retaining screw, and lift up the arm.
By lifting up the arm, the lock on the light-collecting guide assembly is released.
(5) Take out the light-collecting guide assembly.
Carefully place the removed light-collecting guide assembly down onto a soft sheet or
the like, using care not to damage it.
CAUTIONS
• Wear gloves when handling the light-collecting guide assembly. If it is handled with
bare hands, the light-collecting guide assembly may be soiled or damaged.
• Never touch the light-receiving face of the light-collecting guide, even when you are
wearing gloves.
• Carefully handle the light-collecting guide to avoid damage to it due to contact with
surrounding objects.
• Wear a mask to prevent saliva from sputtering around on the light-collecting guide.
009-051-04
05.31.99 FM2460
3 4 5 6
PMT08A board
(3)
Brace
BR M4x12
Light-collecting guide
assembly retaining
bracket
(4)
Arm
BR M4x8
CR-IR341 Service Manual
7 8 9 10
( )
Light-collecting
guide assembly
(2)
CN1
CN2
(2)
Scanner unit
MC - 166
Light-receiving
face
FR1H1795.EPS
MC - 166