FujiFilm CR-IR341 Service Manual page 904

C 11 12
ONTENTS
4. IMAGE PROCESSING DATA: To Save Image Processing Parameter File to FD
(1) Select "4. IMAGE PROCESSING DATA".
The following message appears.
PLEASE SET A FD.
ARE YOU SURE TO COPY IMAGE PROCESSING DATA FILES TO THE FD ?
1.YES 2.NO (DEFAULT=2) :
Meaning: Put a floppy disk into the floppy disk drive. Are you sure to copy the image
(2) Put the floppy disk into the floppy disk drive, and select "1".
Coping to the floppy disk is initiated, with the following messages displayed as files
are copied to the floppy disk.
XXXXXXXXXX IS COPIED.
XXXXXXXXXX IS COPIED.
.
.
.
XXXXXXXXXX IS COPIED.
Meaning: XXXXXXXXXX is copied.
When the floppy disk becomes full, the following message appears.
THE FD IS FULL. EXCHANGE OTHER ONE.
1.CONTINUE 2.CANCEL(DEFAULT=2) :
Meaning: The floppy disk is full. Replace it with another floppy disk.
Replace the floppy disk, and select "1".
Writing to the floppy disk continues, and once all the files are copied, the menu is
displayed.
For any file that cannot be written to the floppy disk, the following message appears.
FILE I/O ERROR. (FILE=XXXXXXXXXX)
XXXXXXXXXX denotes the file name.
The following files are saved to the floppy disk.
• HIPMENU.PRM
• HIPMNRL.PRM
• HIPOP.PRM
• HIPOPT.PRM
• HIPOPTU.PRM
• HIPOPU.PRM
• HIPSTD.PRM
• HIPSTDU.PRM
• PEMU.PRM
009-051-05
11.20.99 FM2638
13 14 15 16
processing parameters to the floppy disk?
• HIPUMN.PRM
• HP.PRM
• HPT.PRM
• HPTU.PRM
• HPU.PRM
• PEM.PRM
• PEMT.PRM
• PEMTU.PRM
CR-IR341 Service Manual
17
MU - 113
MU - 113