FujiFilm CR-IR341 Service Manual page 110

C 1 2
ONTENTS
Scanner Data Flow
HD
(a): Shading data
(b): Polygon data
(c): Sensitivity data
(d): Format data
(e): Other scanner data
7-4-1
: (a), (b), (c),
(d), (e)
NOTE 1
FD
(a): Shading data
(b): Polygon data
(c): Sensitivity data
(d): Format data
(e): Other scanner data
NOTE 1: Data will not be changed unless the machine is restarted after RESTORE.
5-7-2:
5-8-1:
5-8-2:
5-8-3:
5-8-5-1: Select 5. SCANNER UTILITY, 7. SHADING/SENSITIVITY, 5. LOAD FROM
5-8-5-2: Select 5. SCANNER UTILITY, 7. SHADING/SENSITIVITY, 5. LOAD FROM
5-8-6:
7-3-1:
7-4-1:
For more detail, see "4. Maintenance Utility, 4.10 Scanner Diagnostics and Setting: 5.
SCANNER UTILITY, and 4.12 File Operation: 7. FILE UTILITY."
009-051-04
05.31.99 FM2460
3 4 5 6
Automatically loaded upon
startup: (a), (b), (c), (d), (e)
5-8-1 : (a), (b)
5-8-2 : (c)
5-8-3 : (d)
5-8-5-1 : (a), (b)
5-8-5-2 : (c)
7-3-1
: (a), (b), (c),
(d), (e)
5-8-6
: (a), (b), (c)
Select 5. SCANNER UTILITY, 7. SHADING/SENSITIVITY, and 2. CALCULA-
TION in sequence.
Select 5. SCANNER UTILITY, 8. DATA MANAGEMENT, and 1. SAVE SHAD-
ING AND POLYGON DATA in sequence.
Select 5. SCANNER UTILITY, 8. DATA MANAGEMENT, and 2. SAVE SENSI-
TIVITY in sequence.
Select 5. SCANNER UTILITY, 8. DATA MANAGEMENT, and 3. SAVE FOR-
MAT DATA in sequence.
FD, and 1. SHADING AND POLYGON in sequence.
FD, and 2. SENSITIVITY in sequence.
Select 5. SCANNER UTILITY, 7. SHADING/SENSITIVITY, and 2. CALCULA-
TION in sequence.
Select 7. FILE UTILITY, 3. BACKUP, and 1. SCANNER DATA in sequence.
Select 7. FILE UTILITY, 4. RESTORE, and 1. SCANNER DATA in sequence.
CR-IR341 Service Manual
7 8 9 10
Machine's RAM (primary memory)
: Used for actual operation.
Data will disappear when power is
turned OFF or reset.
(a): Shading data
(b): Polygon data
(c): Sensitivity data
(d): Format data
(e): Other scanner data
Scanner
MD - 47
The data in the machine's
RAM is rewritten after
calculation in step 5-7-2.
FR1H1754.EPS
MD - 47