FujiFilm CR-IR341 Service Manual page 440

C 1 2
ONTENTS
Remedy 4
Jam location:
Cause:
IP status:
Recovery procedure
a
Gain access from the front or right-hand side of the machine.
(1) Remove the right-hand side cover.
(2) Release the side-positioning conveyor grip.
(3) Rotate the before-side-positioning conveyor rollers by hand to convey the IP to the
up-down IP removal unit.
(4) Remove the upper front cover.
(5) Pull out the tray of cassette set unit.
"4.1 Pulling Out and Pushing In Tray of Cassette Set Unit"
(6) Rotate the up-down IP removal unit rollers by hand to remove the IP.
b
Gain access from the rear or right-hand side of the machine.
(1) Remove the rear cover.
(2) Remove the rear guide from the before-side-positioning conveyor.
(3) Release the side-positioning conveyor grip.
(4) Rotate the before-side-positioning conveyor rollers by hand to remove the IP.
009-051-04
05.31.99 FM2460
3 4 5 6
Up-down IP removal unit, before-side-positioning conveyor, or side-
positioning conveyor
Conveyance failure
A certain portion of the jammed IP is located in the up-down IP removal
unit with the remaining portions placed in the before-side-positioning
conveyor and in the side-positioning conveyor. Therefore, these three
units cannot be pulled out.
a) The IP cannot be conveyed forward but can be conveyed backward.
b) The IP cannot be conveyed forward or backward.
CR-IR341 Service Manual
MT - 171
MT - 171