FujiFilm CR-IR341 Service Manual page 541

1 2
C
ONTENTS
4.11 Adjusting Movable Roll
Widthwise Adjustment
(1) Remove the shutter assembly.
"4.3 Removing and Reinstalling Shutter Assembly"
(2) Loosen the two hex socket head bolts (M4x8) and one BR screw (M4x8) on the
movable roll assembly retaining bracket.
(3) While pushing the manual release lever of the cassette set unit by hand to withdraw
the hold pin, insert the cassette into the cassette set unit.
(4) Release the manual release lever to secure the cassette with the hold pin.
(5) Align the cassette to the reference side of the cassette set unit.
(6) With the inch/metric movable roll assembly retaining bracket and inch/metric movable
roll pressed against the cassette, tighten the two hex socket head bolts (M4x8) and
one BR screw (M4x8).
SUPPLEMENTARY NOTE
For widthwise adjustment of the 24x30 mammo movable roll, use the 24x30 mammo cassette
and perform similar procedures as for the inch/metric movable roll.
009-051-04
05.31.99 FM2460
3 4 5 6
CR-IR341 Service Manual
7 8 9 10
MC - 50
MC - 50