FujiFilm CR-IR341 Service Manual page 815

1 2
C
ONTENTS
(2) Touch the location to be edited.
The cursor appears at the location touched.
The cursor can be moved by touching the
(3) Using a virtual keyboard, edit it.
• Display a desired virtual keyboard for entry.
Three types of virtual keyboards are available; by touching the
three virtual keyboards can be selected. Also, by touching the [Caps] key, the caps
mode can be toggled to the lower-cap display corresponding to the three types of
virtual keyboards.
• Using the [DEL] or [BS] key, modify the value.
[DEL] key: Each time you touch this key, it erases the character located above the
[BS] key: Whenever it is touched once, a character immediately before (to the left
SUPPLEMENTARY NOTE
If it is difficult to undo the editing with the [DEL] or [BS] key, touch the [CANCEL] key and
repeat from step (1) all over again.
(4) Press the [SAVE] key.
The edited contents are saved to the HD.
The cursor appears
at the location touched.
(5) Back up the configuration file that has been set up.
"7.13 Backing Up Configuration File"
(6) Press the RESET button.
The machine is reset, so that the file that has been set up is effective.
SUPPLEMENTARY NOTE
If there is any other configuration item to be set up, do not press the RESET button. The
RESET button should be pressed after all the setups are finished.
009-051-05
11.20.99 FM2638
3 4 5 6
cursor.
of) the cursor is deleted.
#
# IRSET.ORG/CFG
#
IDT=1
#1.System Type
# 0:CSL / 1:IDT
FNT=0
#2.FONT(LANGUAGE)
# 0:JPN / 1:ENG / 2:GER / 3:FRN / 4:ESP /
# 5:ITA / 6:SWE / 7:FIN / 8:DEN / 9:NOR /
# 10:KOR
# 7:Not Available
# 10:114Y5431030(Korean Option) is necessary.
IPS="172.16.0.1
#3.IP Address(CPU90E) (Length=15)
/sb0/SYSTEM/ETC/IRSET.CFG
SAVE
CR-IR341 Service Manual
7 8 9 10
, , , or
"
CANCEL
MU - 32
key.
or key, one of the
Virtual keyboard
A B
D E
7 8
4 5
1 2
.
0
DEL BS
FR1B1203.EPS
MU - 32
C
F
9
6
3
SP
ENT
Caps