FujiFilm CR-IR341 Service Manual page 848

1 2
C
ONTENTS
Setup Example
hic654 setup content
Attributes of "display function (DISPLAY)" and "active file enabled (HD_FILE)" are set. The
protocol is set to FINP, with the system code and transfer speed omitted.
odf624 setup content
An attribute of "archive file enabled (OD_FILE)" is set. The protocol is set to FINP, with the
system code and transfer speed omitted.
fn-ps551 setup content
Attributes of "film output enabled (PRINT)" are set. The protocol is set to FINP, with the
system code and transfer speed omitted.
An example of description (bold faced) for the above setup is presented below.
| #
| # DEVICE
| #
| # Host Name:Attr|Attr,[Protocol ID],[System code],[Speed]
| # Attr
| # Protocol ID = 0100(FINP) or 0110(FINP) or 0200(DICOM)
| # System code = Hex 2 figures
| # Speed
| hic654:DISPLAY|HD_FILE,0100,,
| odf624:OD_FILE,0100,,
| fn-ps551:PRINT,0100,,
Precaution When Used as CR-IR341P System
The CR-IR341P is only connectable to the CR-IR348CL, so that only "HD-FILE" and "DIS-
PLAY" may be described as attribute names in the configuration.
A setup example is presented below.
| #
| # DEVICE
| #
| # Host Name:Attr|Attr,[Protocol ID],[System code],[Speed]
| # Attr
| # Protocol ID = 0100(FINP) or 0110(FINP) or 0200(DICOM)
| # System code = Hex 2 figures
| # Speed
| iip: DISPLAY|HD_FILE,0200,,
009-051-07
08.30.2001 FM3115
3 4 5 6
= PRINT or HD_FILE or DISPLAY or OD_FILE
= Dec [Kbytes/sec] (default 8Kbytes/sec)
= PRINT or HD_FILE or DISPLAY or OD_FILE
= Dec [Kbytes/sec] (default 8Kbytes/sec)
CR-IR341 Service Manual
7 8 9 10
MU - 57
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MU - 57