FujiFilm CR-IR341 Service Manual page 361

C 1 2
ONTENTS
03B8/13B8IP Position Information Error
Cause
During initialization, it is determined according to the CMOS information that an IP is
found, but no IP is detected as a result of IP search.
Supplementary explanation
During initialization, it is determined according to the CMOS information whether an IP
is found or not in the machine.
During initialization, each motor is activated, and each sensor is used to search for any
remaining IP left in the machine.
This error occurs when no IP is detected as a result of IP search, although it is deter-
mined according to the CMOS information that an IP is found in the machine, during
the above operation.
Reference: This error occurs when the IP located in the machine is intentionally re-
009-051-04
05.31.99 FM2460
3 4 5 6
moved. If the IP is manually removed, clear the backup memory through
"8. BACK UP MEMORY" of M-Utility. Note, however, that when backup
memory is cleared, all the error codes stored are also cleared as well.
CR-IR341 Service Manual
MT - 92
MT - 92