FujiFilm CR-IR341 Service Manual page 950

C 11 12
ONTENTS
16.2 Formatting Hard Disk
CAUTION
For the CSL-type machine for use in the U.S., if the hard disk is formatted and software is
reinstalled, be sure to install the "Menu default FD for USA" setup file as well.
Formatting Procedures
The hard disk should be formatted only when a hard disk access error frequently occurs or
the data on the hard disk is lost wholly or partly.
(1) Make sure that the machine is powered OFF.
If the power is ON, place the circuit breaker in the OFF position to power OFF the
machine.
(2) Put the "FORMAT" disk into the floppy disk drive.
CAUTION
If you change your mind and do not want to format the hard disk, remove the
"FORMAT" disk from the floppy disk drive before doing anything. If you power ON the
machine with the "FORMAT" disk inserted into the floppy disk drive, the system
automatically initiates the hard disk formatting sequence without asking for the user's
confirmation.
009-051-05
11.20.99 FM2638
13 14 15 16
CR-IR341 Service Manual
17
MU - 159
MU - 159