FujiFilm CR-IR341 Service Manual page 385

1 2
C
ONTENTS
03D4 Branch Path Changeover Guide Operation Error
Cause
After SOLF1 is activated, the IP is conveyed toward the erasure lamp, but SF1 turns
ON.
Supplementary explanation
The IP conveyed from the after-reading conveyor is conveyed into the inverting stocker
of the erasure conveyor.
After the IP passes over SF2 (SF2: ON to OFF), SOLF1 is driven and the path
changeover guide is activated.
As the path changeover guide is activated, the IP conveyance direction is switched to
the erasure lamp unit.
After the conveyance direction is switched, the IP is conveyed toward the erasure lamp
by the driving of MF1, and the IP passes over SF2 again. (SF2: OFF to ON)
This error occurs when the IP passes over SF1 (SF1: OFF to ON) during the above
operation. (Normally, SF1 does not turn ON once the path is changed.)
Sensor related
Error-related I/O locations
After-reading conveyance
standby IP sensor
Error-related system block diagram
AC IN
DC OUT2
JPS-1
DC OUT3
009-051-04
05.31.99 FM2460
3 4 5 6
ON: Close, OFF: Open
SF1
SNS08A
CN
CN8
CN13
CN4
DRV03D
CN3
CNSOLF1
CN3
CN11
DRV08A
CN1
CR-IR341 Service Manual
SOLA4
SOLF1 Branch path changeover guide drive
CNF1
SOLF1
FR1H0072.EPS
MT - 116
FR1H0071.EPS
MT - 116