FujiFilm CR-IR341 Service Manual page 543

1 2
C
ONTENTS
Adjusting Rearward Toppling Prevention Bracket
(1) Loosen the two screws that retain the metric rearward toppling prevention bracket
(screwed down on its upper and lower portions).
(2) Make adjustment as appropriate so that the descent of the trailing edge of the movable
roll is 1 mm or less when it is slightly pushed down.
By sliding the rearward toppling prevention bracket in the direction of arrow as shown
below (toward the shutter assembly), the descent of the trailing edge of the movable
roll is decreased.
Top view
Side view
009-051-04
05.31.99 FM2460
3 4 5 6
Trailing edge of movable roll
Metric movable roll
The descent is decreased.
Slightly push the trailing edge of the movable roll.
Movable roll
CR-IR341 Service Manual
7 8 9 10
(2)
Metric rearward toppling prevention
bracket
(1)
Hex socket head bolt with spring and
plain washer
M4x10 (lower portion)
(1)
Hex socket head bolt with spring
and plain washer
M4x10 (upper portion)
Movable roll
Ensure that it is 1 mm or less.
Movable roll support guide
MC - 52
FR1H1763.EPS
FR1H1766.EPS
MC - 52