FujiFilm CR-IR341 Service Manual page 369

C 1 2
ONTENTS
03C0 Reading Preparation Conveyance Error
Cause
SZ1 turns ON prior to IP reading preparation.
Supplementary explanation
The IP conveyed to the side-positioning conveyor is temporarily stopped by the side-
positioning stopper to perform side-positioning operation, and then moved to the side
guide.
Once the IP side-positioning operation is completed, the side-positioning stopper is
released, so that the IP is conveyed toward the subscanning unit.
The IP is conveyed to the subscanning unit, and passes over SZ1. (SZ1: OFF to ON)
As the IP passes over SZ1 (SZ1: OFF to ON), the IP leading edge is detected.
This error occurs when the IP overruns the side-positioning stopper prior to the side-
positioning operation and passes over SZ1 of the subscanning unit (SZ1: OFF to ON)
during the above operation.
Sensor related
Error-related I/O locations
Error-related system block diagram
AC IN
DC OUT2
JPS-1
DC OUT3
009-051-04
05.31.99 FM2460
3 4 5 6
ON: Close, OFF: Open
SOLA4
MD3 IP transport motor
SZ1
IP leading edge sensor
SNS08A
CN
CN9
CN13
CN4
CN4
DRV03D
CN3
CN3
CN5
DRV08A
CN1
CR-IR341 Service Manual
SD3 Side-positioning
IP sensor
FR1H0042.EPS
CNZ2
CND1
CNZ11
CNZ7
MD3
CNMD3
FR1H0043.EPS
MT - 100
MT - 100