FujiFilm CR-IR341 Service Manual page 866

C 1 2
ONTENTS
9.4 4. LAN: LAN Test
SUPPLEMENTARY NOTE
For the machine with the LAN90B installed as a network board, those described or displayed as
"CPU90F" should be read as "LAN90B".
1. ETHERNET MAC ADDRESS: To Display MAC Address of CPU Board
For the CPU90E and CPU90F boards, their Ethernet MAC addresses are displayed. If the
CPU90F board is not installed, only the MAC address of the CPU90E is displayed.
2. PING: To Execute ping
Diagnostic checks are performed to determine whether communication can be established
between the destination host and the LAN (CPU90E/CPU90F) of the machine.
(1) Execute 2.PING.
The following message appears.
INPUT THE CONNECTED HOST-NAME OR IP ADDRESS.
Meaning: Enter the host name or IP address of the host connected.
(2) Enter the host name or IP address of the host connected.
If the CPU90F board has been installed in the machine, the following message
appears after input.
SELECT BOARD.
1.CPU90E 2.CPU90F :
Meaning: Select the board.
If the CPU90F board has not been installed in the machine, the following message
appears.
CPU90F BOARD HAS NOT MOUNTED.
Meaning: The CPU90F board is not available.
(3) Type in either "1" or "2".
A ping test is initiated, with the following message displayed.
PING TEST IS IN PROGRESS.
RESULT - OK (or RESULT - ERROR)
Meaning: A ping test is now being performed.
009-051-07
08.30.2001 FM3115
3 4 5 6
CR-IR341 Service Manual
7 8 9 10
MU - 75
MU - 75